Oil/water separators are used to remove non-emulgated oils. A crust is created by placing a number of flow deflectors in the oil/water separators. Because the oil/water separator is usually the first treatment step after extraction, this step is implemented as standard with a sand trap system. As a result, rough precipitable particles are intercepted directly. The removal success rate greatly depends on the concentrations of influent.
he dimensions of the standard oil/water separators are the same as those of our standard buffer tanks
| TYPE | OWS-2 | OWS-3 | OWS-6 |
| Max. design flow (m³/h) | 15 | 25 | 100 |
| SS scimmergutter | Yes | Yes | Yes |
| SS covers with handles | 2 pieces | 3 pieces | - |
| Hoisting lugs | 4 | 4 | 4 |
| Forklift holes | Yes | Yes | no |
| Pumping buffer | Yes | Yes | Yes |
| Optional coalescence filter | Yes | Yes | - |
| Tarpaulin | - | - | Yes |
| Measurements (AxBxC) mm | 2500x1250x1670 | 3.750x1250x1670 | 6500x2750x2500 |
| Inlet / outlet | DN100/DN100(2x) | DN100/DN100(2x) | several |
