Storage tanks and buffers

In fact, the use of buffers requires little explanation: they are used to store water or sludge. Sludge buffers can be manufactured with a conical bottom and a drain outlet if required.

Our standard buffers with volumes up to and including 14 m³ are equipped with lids with handles on the top. Buffers with larger volumes are covered by means of a tarpaulin. The table below gives our standard dimensions.

TypeCap.(m³)A (mm)B (mm)C (mm)
BB-12,3125012501670
BB-24,6250012501670
BB-37,0375012501670
BB-410,5375018751670
BB-628,0600025002500

A=length
B=width
C=height